Difference between revisions of "StationShipment ShowIntransit"

From SkySuite Wiki
Jump to navigation Jump to search
(Created page with "<H1>Confirming Receipt of your Shipments</h1> On receipt of your shipment you will need to confirm receipt of the goods and close out the shipment in SkyLog. It is important...")
 
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
 +
__TOC__
 +
 
<H1>Confirming Receipt of your Shipments</h1>
 
<H1>Confirming Receipt of your Shipments</h1>
 
  
 
On receipt of your shipment you will need to confirm receipt of the goods and close out the shipment in SkyLog. It is important that you verify receipt of your shipment against the packing list that accompanies the shipment.  
 
On receipt of your shipment you will need to confirm receipt of the goods and close out the shipment in SkyLog. It is important that you verify receipt of your shipment against the packing list that accompanies the shipment.  
  
  
A single shipment may relate to more than one issue in SkyLog if one or more issues have been consolidated into a single shipment. You can confirm each issue on by one using the “Receipt Confirmation” under Station Provisioning or you can confirm multiple issues using the “Batch Receipt Confirmation” tab.
+
A single shipment may relate to more than one issue in SkyLog if one or more issues have been consolidated into a single shipment. You can confirm each issue one by one using the “Receipt Confirmation” under Station Provisioning or you can confirm multiple issues using the “Batch Receipt Confirmation” tab.
 
 
  
 
<H2>Confirming each Issue individually</H2>
 
<H2>Confirming each Issue individually</H2>
 
  
 
To access the Receipt Confirmation functions, select the “Receipt Confirmation” option under “Daily Activities”, “Provisioning” from the home page.
 
To access the Receipt Confirmation functions, select the “Receipt Confirmation” option under “Daily Activities”, “Provisioning” from the home page.
Line 23: Line 22:
  
  
In the header part of the screen you need to confirm the date you received the shipment, it will default to the current date but you should change this if it was received earlier. This is important as SkylogistiX use this data to monitor the performance of the suppliers and transport providers. The image below shows the part of the screen where you enter the date received.
+
In the header part of the screen you need to confirm the date you received the shipment, it will default to the current date but you should change this if it was received earlier. This is important as SkylogistiX uses this date to monitor the performance of the suppliers and transport providers. The image below shows the part of the screen where you enter the date received.
 +
 
 +
 
 +
[[File:r_conf_3.png]]
 +
 
 +
 
 +
In the detail section which lists all the items on the shipment you need to confirm the quantity of each item received. You should also use the comments field to record any discrepancies with the shipment.
 +
 
 +
 
 +
[[File:r_conf_4.png]]
 +
 
 +
 
 +
The first step to confirming your receipt is to enter the Received Quantity. You can either type this in line by line or you can use the “Set All Received Quantity” button, located at the bottom of the screen, which will set the Received Quantity for every line to match the Despatch Quantity. Then if some lines are different you can edit them before pressing “Confirm”.
 +
 
 +
 
 +
If you wish to record a comment such as “Goods were damaged” you can do so in the comment field for the line in question.
 +
 
 +
 
 +
When everything is ok and you want to confirm the receipt press the “Confirm” button.
 +
 
 +
 
 +
<h2>Using the Batch Receipt Confirmation function</h2>
 +
 
 +
You can also use the batch receipt confirmation page, see [[http://wiki.skylogportal.com/?title=StationShipment_IntransitShipmentStationsIndex here]] for its separate walk through.

Latest revision as of 08:52, 8 May 2020

Confirming Receipt of your Shipments

On receipt of your shipment you will need to confirm receipt of the goods and close out the shipment in SkyLog. It is important that you verify receipt of your shipment against the packing list that accompanies the shipment.


A single shipment may relate to more than one issue in SkyLog if one or more issues have been consolidated into a single shipment. You can confirm each issue one by one using the “Receipt Confirmation” under Station Provisioning or you can confirm multiple issues using the “Batch Receipt Confirmation” tab.

Confirming each Issue individually

To access the Receipt Confirmation functions, select the “Receipt Confirmation” option under “Daily Activities”, “Provisioning” from the home page.


R conf 1.png


R conf 2.png


You should see a list of all the shipments on the way to you that have not yet been confirmed as received. You can view the detail by pressing the “Show” icon, if you want to confirm receipt of the shipment press the edit pencil icon.


In the header part of the screen you need to confirm the date you received the shipment, it will default to the current date but you should change this if it was received earlier. This is important as SkylogistiX uses this date to monitor the performance of the suppliers and transport providers. The image below shows the part of the screen where you enter the date received.


R conf 3.png


In the detail section which lists all the items on the shipment you need to confirm the quantity of each item received. You should also use the comments field to record any discrepancies with the shipment.


R conf 4.png


The first step to confirming your receipt is to enter the Received Quantity. You can either type this in line by line or you can use the “Set All Received Quantity” button, located at the bottom of the screen, which will set the Received Quantity for every line to match the Despatch Quantity. Then if some lines are different you can edit them before pressing “Confirm”.


If you wish to record a comment such as “Goods were damaged” you can do so in the comment field for the line in question.


When everything is ok and you want to confirm the receipt press the “Confirm” button.


Using the Batch Receipt Confirmation function

You can also use the batch receipt confirmation page, see [here] for its separate walk through.